Geosynthetics for erosion control

Used for :

  • Asphalt overlay
  • Paved & unpaved roads
  • Erosion control
  • Slope stabilization
  • Retaining walls
  • Drainage
  • Beach erosion

These geotextiles are produced from 100% synthetic staple fibers needle punched together to form a high quality, dimensionally stable fabric. The synthetic fibers are specially formulated to resist deterioration due to exposure to ultraviolet light.

environmental-2.jpg
environmental-4.jpg
environmental-3.jpg

We have these items in stock now.

Download File

DescriptionCrown ResourcesComparable to MirafiRoll SizeSquare Yards
<300 lb. GrabW300600X15' x 360'600
High Strength FabricsM403HP37015' x 300'500
Non-Woven Fabrics (OZ /SY)R042140N12.5' x 360'500
R070170N15' x 300'500
R080180N12.5' x 360'500
R1601160N12.5' x 360'500
Paving FabricsC040Mirapave 50012.5' x 360'500
GeogridBX 12 13.1' x 164'240

These items are available for order:

Download File

DescriptionPermeTex <th style="font-size:9px;width:8%" "="">CROWN RESOURCESAMOCOBELTONLINQMIRAFIREEMAYSYNTHETICTERRAMGeostar Tech
<100 lb. Grab2100  896   915SC  
  2000806 / 810 500XL 135ST  
 W180 751GTF 200S  180ST  
<200 lb. Grab2200 2002200 / 880GTF 200500X 200ST GW 40
2250W2502004250 / 777GTF 250550X 250ST GW 50
<300 lb. Grab2300W3002006315 / 883GTF 300600X 315ST GW 63
High Strength Fabrics6200M4032016  HP370 2 x 2  
6300    HP470 3 x 3  
6400 2044 GTF 570HP570 / HS400 4 x 4  
6600    HP770 / HS600 6 x 6  
6800    HS 800 8 x 8  
Woven Monofilament5104M7061199 / 2019 GTF 400EFW 700 / 700X 104F G40E
5110M4041198 / 2016 GTF 400EOFW 400 111F G70E
Non-Woven Fabrics



( OZ / SY)
4020-S     3201 (60 lb) 500 (67 lb) 
4025-S       600 (84 lb) 
4030 / 4030-SR0314535  135N3301 (120 lb)311800 (101 lb)GN31
4035 / 4035-SR0354545 125EX140NL3341 (120 lb)351900 (124 lb)GN35
4040 / 4040-SR0404546 130EX140NC3401 (130 lb)401 GN40
4045R0424547 140EX140N 451 GN42
4050R0504550  150N3501 (160 lb)501  
4060R0604551  160N3601 (240 lb)601 GN60
4065E0604506 150EX 3631 (250 lb)651  
4070R0704552 160EX  701 GN70
4080R0804553 180EX180N3801 (325 lb801 GN80
4085E080  225EX  861  
4090      891  
4100R1004555 250EX1100N 1001 GN100
4105E1004510    1071  
4110      1101  
4120R1204557 275EX1120N 1201 GN120
4130E1204512    1291  
4135      1341  
4160R1604561 350EX1160N 1601 GN160
4170 4516    1701  
4175E160     1751  
Paving Fabrics4035-PC0394599  Mirapave 400 Pavedry 381  
  4598       
4040-PC0404597  Mirapave 500 Pavedry 461  

Track out grate

Shaker rack,

Removes soil, rock and mud from vehicles leaving the work zone and entering offsite areas such as public roadways. They reduce safety hazards on roadway and sediment pollution in waterways. These vehicle tracking BMPs limit the amount of pollutants leaving the construction site. Also called shaker racks, rattle grate, or rumble plates are standard use for exits at construction sites.

HEAVY DUTY Steel Track Out Grates (TOG) for the Professional

track-out-grate-1.png

  • Heavy duty steel track out grates with an open bottom that allows debris to fall through. Innovative design allows for minimal maintenance; saving you time and money.
  • Track Out Grates -- Tubular Steel
  • 8' x 10' ONLY 1,350lbs! Great for Stabilized Entries on base rock or dirt. Ramps for hard surface placement like asphalt or concrete!

Traditional Steel Rumble Plates / Shaker Plates / Track Out Plates (TOP)

track-out-grate-2.png

  • Traditional steel track out plate. Angle iron cut at 45 degrees on edges to prevent ripped tire sidewalls. Shaker plate / Rumble plate / Rattle grate / Rattle plate.
  • Track Out Plates -- Traditional Design
  • 8' x 10' Steel Plate based units.
  • 2-1/2" x ¼" Angle Iron –(stronger than competitors 3/16")
  • 45 degree cuts on EDGES so no Ripped TIRE SIDEWALLS~