Page 20 - Section3.2-FiltrexxLockDownNetting

310 | Filtrexx ® Low Impact Design Manual | Version 8.0

4. A pressure/volume reducer shall be installed at the highest point of elevation for the area to be irrigated. The water source must connect to the reducer and fow by gravitational means. 5. End points of the Drip Tape may be closed with an irrigation plug or folded closed according to drip tape manufacturer’s specifcations.

Inspection & Maintenance

If Drip Tape Irrigation becomes damaged, clogged, or is moved to a section of the FilterSoxx tm where it becomes ineffective, it shall be repaired, replaced, and/or reinstalled according to specifcations.

Method of Measurement

Bid items shall show measurement as Drip Tape Irrigation System + Filtrexx ® BMP per linear ft or per linear m installed within Filtrexx ® FilterSoxx ™ .

ADDITIONAL INFORMATION

For other references on this topic, including trade magazine and press coverage, visit the Filtrexx ® Website at: http://www.fltrexx.com/resourcespress. htm.

For research reports not included in the Appendix, visit: http://www.fltrexx.com/resourcesreports.htm.

Filtrexx ® International, LLC Technical Support 35481 Grafton Eastern Grafton, OH 44044 440-926-2607 440-926-4021 (fax) Website: www.fltrexx.com Email: info@fltrexx.com

See website or call for complete list of international installers.

The information contained herein may be subject to confdential intellectual property of Filtrexx ® International, LLC, including but not limited to US Patent 7,226,240 or Patents Pending and is the property of Filtrexx ® International, LLC.

Unauthorized reproduction prohibited. Filtrexx ® is a Registered Trademark of Filtrexx ® International, LLC.

Copyright 2009, Filtrexx ® International, LLC, all rights reserved.