Stacker Sign Stand (#DSB100)
Manufacturer:
Dicke Safety Products 
- Low profile rubber base design is ideal for limited storage or display areas.
- Recessed trim molded into rubber base allows for firm, compact storage.
- Two molded handles allow for easy transport to and from the work zone.
- Pocket panel holder clamps roll-up sign to stand utilizing the plastic pocket on the sign panel. Also available with the universal ScrewLock™ sign holder.
- Mast folds down into rubber base via kick release for storage.
- Available in two weights: #DSB100 - 42 lbs., #DSB100HD - 48 lbs.
DynaLite 1000 Series Sign Stand (#DL1000 Series)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility- crash test results available.
- Complies with MUTCD standardsLightweight - perfect for low wind applications.
- Displays 36" and 48" signs using ScrewLock™ attachment.
- By eliminating a spring mechanism, this stand weighs 20% less than Dynaflex™ stands.
- Fast and easy deployment with the kick release system.
- Legs lock into position when fully extended.
- All aluminum and steel construction
- Telescoping aluminum legs with two position height adjustment and anti-skid foot pads.
Uniflex 2000 Sign Stand (#UF2000 Series)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility - crash test results available
- Complies with MUTCD standardsFeatures versatile, compact single-coil spring.
- Ease of use with fast kick release system, locking legs into place when fully extended
- Displays 36" and 48" roll-up signs in several configurations.
- All aluminum and steel construction
- Telescoping aluminum legs with two position height adjustment and anti-skid foot pads
- Minimum height from the ground to bottom of panel: 12" (305mm)
- Full extension length: 51" (1295 mm)
DynaFlex 4700TX Sign Stand (#DF4700TX)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility - crash test results available.
- Displays 36: and 48" roll-up sign panels 7 feet off the ground.
- Fast and easy deployment with the kick release system.
- Legs lock into position with dual settings to adjust for uneven terrain.
- Mast ans legs made of lightweight corrosion-resistent aluminum tubing, all steel components coated to reduce corrosion.
- Holds up to three flags.
- Open footprint - full leg extension: 82" x 128" (2082 mm x 3251 mm)
- Leg length: 72" (1829 mm)
DynaFlex 4000 Sign Stand (#DF4000)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility with roll-up sign panel. Also compliant with Reflexite "Endurance" panel. Crash test results available.
- Complies with MUTCD standards.
- Displays 36: and 48" rigid sign panels with two Rigid Panel Brackets and accommodates up to three flags with attached flag holder.
- Roll-up panel bracket holds 36" or 48" roll-up panels.
- Compact storage design with kick release system for easy leg deployment and dual leg setting to adjust to uneven terrain.
DynaFlex 3003S Sign Stand (#DF3003S)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility- crash test results available
- Complies with MUTCD standards
- Wind-relieving, dual torsion spring system - withstands winds to 65 mph.
- Ease of use with fast kick release system, locking legs into place when fully extended
- Displays 36" and 48" Fold and Roll™ signs with quick-locking Stablock™ sign holding system
- All aluminum and steel construction
- Telescoping aluminum legs with two position height adjustment and anti skid foot pads
- Full extension length: 51" each leg
TwinFlex 1230 Sign Stand (#TF1230)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatible.
- Complies with MUTCD standards.Displays 36" and 48" roll-up signs.
- Wind-relieving, dual upright coil spring system - withstands winds to 65 mph.
- All aluminum and steel construction.
- Quick set-up and tear down with step release system for leg deployment.
- Legs feature two position height adjustment and anti-skid foot pads.
- Sign height from ground: 14" min. to 40" maximum.
- Closed storage dimensions: 6.50" x 6.75" x 49".
- Open footprint: 50" x 74"Weight: 28 lbs
T150 Tripod Sign Stand (#T150)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 test level 2 compatibility with rigid or roll-up sign.
- Comes with bothrigid and roll-up sign brackets.
- Rugged galvanized steel square tube construction.
- Telescoping mast with triple flagholder.
- Storage height: 56" (1422 mm)
- Open footprint: 50" x 55" (1270 x 1397 mm)
- Weight: 18 lbs.
T50 Tripod Sign Stand (#T50)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 test level 2 compatibility with roll-up sign. Crash test results available.
- Complies with MUTCD standards.
- This lightweight stand is made of durable, 1" O.D. galvanized mechanical tubing with no sharp edges.
- Displays 36" and 48" roll-up or rigid sign panels.
- Tripod design allows for quick and easy set-up.
- Closed position: Height 62" (1575 mm)
- Open position: Height 54" (1372 mm)
- Footprint: 50" wide x 54" deep (1270mm x 1372 mm)
- Minimum panel display height: 12 " (305 mm)
DynaFlex 4503 Sign Stand (#DF4503)
Manufacturer:
Dicke Safety Products 
- NCHRP 350 compatibility - crash test results available.
- Displays 36: and 48" roll-up sign panels 5 feet off the ground.
- Fast and easy deployment with the kick release system.
- Telescoping aluminum legs feature two position height adjustment for uneven terrain and anti-skid foot pads.
- Mast and legs are made of lightweight corrosion-resistent aluminum tubing, all steel components are coated to reduce corrosion.
- Holds up to three flags.
- Open footprint - full leg extension: 72" x 117" (1829 mm x 2972 mm)
