FP-330

Manufacturer: 
RKI Instruments, Inc.
FP-330 Image

High Sensitivity Formaldehyde Gas Monitor

RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free gas detection. The FP-330 is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-330 will also display remaining tape life as well as an end of tape alarm.

FP-301FL

Manufacturer: 
RKI Instruments, Inc.
FP-301FL Image

High Sensitivity Formaldehyde Gas Monitor

RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels of a wide variety of gases. The FP-301FL is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-301FL will also display remaining tape life as well as an end of tape alarm.

FP-260

Manufacturer: 
RKI Instruments, Inc.
FP-260 Image

High Sensitivity Toxic Gas Monitor for Phosphine, Silane, Diborane, Arsine, Disilane, Hydrogen Sulfide, Phosgene, Chlorine, and Hydrogen Selenide

The FP-260 is a highly sensitive toxic gas monitor using a gas detection cassette tape which is almost free of interference from other gases. Since the detection tape responds only to the chemical reaction of the gas being measured, there is no interference from hydrogen or organic gases.

FP-260AGZS

Manufacturer: 
RKI Instruments, Inc.
FP-260AGZS Image

High Sensitivity Toxic Gas Monitor for Octafluorocyclopentene, Perfluorobutadiene, or Hexafluoropropylene

This model is a highly sensitive C5F8 / C4F6 / or C3F6 gas monitor which uses a special techniquie for detecting C5F8, C4F6 or C3F6. into more readily detectable compounds.

FP-300

Manufacturer: 
RKI Instruments, Inc.
FP-300 Image

High Sensitivity Toxic Gas Monitor

RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels Ammonia, Arsine, Chlorine, Diborane, Hydrogen Chloride, Hydrogen Fluoride, Hydrogen Sulfide, Phosphine, Silane. The FP-300 is equipped with an easily replaceable tape. This model is equipped with a digital display showing the type of gas and concentration in PPM or PPB. The FP-300 will also display remaining tape life as well as an end of tape alarm.

need-quote.png